How To Start Your Equipment With Ceramic Membrane Elements?
After mounting the equipment: Fill the equipment with desalted water. Do not use normal water, chalk inside normal water can reduce the flow rate. Start your equipment and start a normal filtration run. After approx. 10 min. go to max. transmembrane pressure. If necessary, start a normal cleaning run with membrane cleaners. Then rinse the equipment and refill with the fluid you wish to filter. Start filtration.Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldRephraseRephrase current sentenceEdit in Ginger
JIUWU Membrane Products
Related FAQ
December 27, 2018The thermal stability of ceramic membrane determines that it can be operated at high temperatures for a long time. This advantage is particularly suitable for treating feed with high temperature or th...view
December 27, 2018Yes. Ceramic membrane machine can be designed with backpulsing unit. The backpulsing unit could keep ceramic membrane clean during running. It is a kind of cleaning unit.view
November 1, 2018During filtration by means of ceramic membrane made by JIUWU the medium to be filtered flows through the channels of the membrane carrier. All particles whose size exceeds the pore radius of the membr...view
December 27, 2018Jiuwu ceramic membrane resist repeated chemical or thermal sanitizing cycles. Their wide range of pH compatibility enables the filtration of acid or base solutions. They are also compatible with all o...view
December 27, 2018On receipt, inspect the product and packaging for signs of damage. Check if the grade and part number of the item supplied meets the requirements for the applicationThe product should be stored in its...view
December 27, 2018Ceramic membrane needs to be used and operated in normal operating procedures. The following conditions and chemicals of operation are absolutely not allowed, because it may destroy or damage ceramic ...view